RCU_1010_RF_IB_RevA.qxd
All manuals and user guides at all-guides.com
6. The Confirm to Delete? Screen is displayed. Press and release
the LCD OK key. This display returns to either the Delete a
Timer Screen or, if no more Event Timers have been
programmed, to the Exit Setup Screen.
7. Deleting an Event Timer is now complete. To exit
Setup Mode, press and release the LCD OK key at the
Exit Setup Screen.
TV or CD/AUDIO Volume Punch-through
Your RCU1010RF's Volume Punch-through feature allows you to choose which component mode
(either TV or AUDIO 1, 2, 3 or 4) controls the VOL+, VOL- and MUTE keys on the rubber keypad.
With this feature, your TV volume can work even when you are in VCR Mode, because it "punches
through" from one component to another.
The component you select for Volume Punch-through control must be either the TV or the AUDIO
1, 2, 3 or 4 component programmed with a CD/AUDIO component. The power-on default for
volume control is TV Volume Punch-through.
Once the Volume Punch-through feature is programmed, your TV or AUDIO component VOL+,
VOL- and MUTE keys work even when you are in CABLE, DVD, SAT and VCR Modes.
(
Use VCR Mode for PVR/DVR.)
Note:
All CD/AUDIO Modes take any Volume/Mute keypress commands from the CD/AUDIO code,
Note:
even when the TV is programmed as the Punch-through component. All other components punch
through to the TV Volume/Mute control. When the CD/AUDIO option is chosen as the Punch-through
component, all modes take any Volume/Mute keypress commands from the CD/AUDIO code.
To change the component that controls the VOL+, VOL- and
MUTE keys Punch-through, follow these steps:
1. Press and hold the SETUP key on the rubber keypad for
2-3 seconds until the LED indicator light remains on and the
touchscreen shows the Code Setup Mode? Screen.
2. Release the SETUP key.
3. Press and release the SETUP key repeatedly until the Set
More Options? Screen appears. Press and release the LCD
OK key. The Set Time? Screen appears.
TV or CD/AUDIO Volume Punch-through (continued on next page)
9/24/03
10:31 AM
Page 25
25