BLAZE BLZ-ELEC-21 Manuel Du Propriétaire page 12

Built-In Models
Reference the figures below and to the right
when installing your built-in electric grill.
.Using a Phillips-head screwdriver, remove
1
the 4 screws on the side of the grill and
bumpers on the bottom of the grill. Discard
the bumpers.
.Using the same 4 screws, fasten the
2
electric grill built-in brackets to the unit.
.Carefully lift the unit and slide into the
3
islands pre-cut hole. Built-in specifications
and regulations can be found on pages 4, 5,
and 7.
.Route power cord to outlet ensuring no
4
contact with heat source or any pinch points.
Important: BEFORE USE , the grill base must
be securely fastened to a stable, level surface
to ensure the grill remains fixed and upright
at all times.
12