NewAge Products Pro 3.0 Serie Manuel D'installation page 7

Installing the Sink Drain
Parts Needed.
Tailpiece
Locking Nut
Tailpiece
Anti-Friction
Locking Nut
Ring
4 -1/4"
Rubber Washer
Insert the drain body into drain
2
opening and press into plumber's
putty.
4 Clean off excess plumbers putty from
inside of sink and around the drain.
Drain Drain Body
Plastic
Tailpiece
Washer
Apply a thin bead of plumber's putty
1
to the perimeter of the drain
opening on the inside of the sink.
From the bottom of the sink add the
3
rubber washer, anti-friction ring and
tighten the drain locking nut
Rubber Washer
Anti-Friction Ring
Drain Locking Nut
From the bottom of the sink add the
5
tailpiece washer, tailpiece and
tighten with the tailpiece locking nut.
Tailpiece Washer
Tailpiece
Tailpiece Locking Nut
7