NewAge Products Pro 3.0 Serie Manuel D'installation page 13

Fastening Cabinets
Parts Needed.
Hex Bolt
(1/4 x 5/8")
Washer
Lock Nut
(1/4")
(1/4")
Note:
Remove all drawers before
fastening cabinets.
Bolt each subsequent
cabinet to the previous
one using the supplied ¼"
x 5/8" hex bolts and lock
nuts provided in each base
and wall cabinet.
2
Using a 12 inch magnetic level, align the cabinets and tighten all bolts.
1
Align bolts, tighten lightly.
Note:
Fasten additional cabinets to
initial securely mounted cabinet.
4 X EACH
CABINET
13