NewAge Products Pro 3.0 Serie Manuel D'installation page 5

Installing the Faucet and Sink
Parts Needed.
Top Washer
with Sealing
Gasket
Plastic
Faucet
Fastening
Assembly
Sleeve
From the bottom of the sink add the
2
sealing gasket, metal washer and
tighten the plastic fastening sleeve.
Once the screws have been inserted
4
half way, place sink into opening.
Align screws underneath sink with
hole openings on cabinet.
Sealing
Metal
Gasket
Washer
Threaded
Sink
Reducer
Sealing Gasket
Sealing Gasket
Metal Washer
Metal Washer
Plastic Fastening
Plastic Fastening
Sleeve
Sleeve
Add top washer with sealing gasket
to faucet assembly and insert braided
1
hoses through faucet hole on top side
of sink
Braided
Hose
3 Along the bottom side edges of the
sink, insert four 4mm x 15mm bolts
half way.
Push the sink top to either sit flush
5
to the back of the cabinet or flush
to the front of the cabinet
5