Wilson Electronics weBoost Drive Reach Fleet Guide D'installation page 7

______
(STEP 2 cont.)
Before attaching the antenna, apply a thin layer of silicone
grease to the antenna o-ring, and to the threads of the NMO
mount. Screw the antenna onto the NMO mount and hand
tighten into place.
NOTE: DO NOT apply silicone grease to the antenna pin contact surface.
apply silicone grease
apply silicone grease
DRIVE REACH FLEET PROFESSIONAL VEHICLE SIGNAL BOOSTER KIT
screw on
NMO Antenna
hand tighten and make sure
o-ring is touching vehicle
surface
5