Step 1: Drill Cable Entry Hole To Your Vehicle - Wilson Electronics weBoost Drive Reach Fleet Guide D'installation

______
Step 1: Drill Cable Entry Hole
To Your Vehicle
Identify a location for the NMO Outside Antenna on
the top of your vehicle that is:
• Near the center of the roof
• At least 30 cm away from any other antennas
• At least 30 cm away from any windows
(for best performance install on top of vehicle)
Do a 'soft install' before drilling the hole for the
cable entry.
• Set up the system by routing the cable through
an open door or window, completing the setup
instructions, verifying the system works as desired,
and then drilling the hole.
30 cm away from windows
2
PROFESSIONAL VEHICLE SIGNAL BOOSTER KIT DRIVE REACH FLEET
(including sunroofs)
Good NMO Outside
Antenna Placement