Before Using The Unit; When Moving This Unit - Sylvania SRCD844 Mode D'emploi

Enregistreur de cd tourne-disquesnostalgie7 en 1
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Read this before attempting any operations
As the unit may become warm during operation, always leave
sufficient space around the unit for ventilation.
The voltage supplied to the unit should match the voltage as
printed on the rear panel. If you are in any doubt regarding
this matter, consult an electrician.
Choose the installation location of your unit carefully. Avoid
placing it in direct sunlight or close to a source of heat. Also
avoid locations subject to vibrations and excessive dust, heat,
cold or moisture.
Do not place the unit on an amplifier/receiver.
Do not open the cabinet as this might result in damage to the
circuitry or electrical shock. If a foreign object should get into
the unit, contact your dealer or service company.
When removing the power plug from the wall outlet, always
pull directly on the plug, never yank the cord.
To keep the laser pickup clean, do not touch it, and always
close the disc tray.
Do not attempt to clean the unit with chemical solvents as
this might damage the finish. Use a clean, dry cloth.
Keep this manual in a safe place for future reference.
All manuals and user guides at all-guides.com

BEFORE USING THE UNIT

DO NOT MOVE THE UNIT DURING PLAYBACK
During playback, the disc rotates at high speed. Do NOT lift or
move the unit during playback. Doing so may damage the
disc or the unit.

WHEN MOVING THIS UNIT

When changing the unit's location or packing the unit for
moving, be sure to remove the record or disc. Moving this
unit with the record or disc loaded may result in damage to
this unit. If the unit is to be packed and moved a great
distance, it is also advisable to tighten the turntable transport
locking screw.
5

Publicité

Table des Matières
loading

Table des Matières