Sylvania SRCD844 Mode D'emploi page 27

If the disc is fully recorded, "--Full" will appear on screen, please change other discs to record.
5. To finalize the disc, press stop
to CD mode, then press the "FINALIZE" button, "Fin-d" will appears, press Play/Pause
button to start finalizing, "---busy" will appears, the disc door will open after finalizing completed.
NOTE:
For CD-R or CD-RW, If it is recorded and finalized, the disc is possible to to played by
ordinary CD players, if it is recorded but not finalized, the disc will not be possible to be
played by ordinary CD players.
Once finalized, CD-R disc is truly final. No more tracks can be recorded. CD-RW disc
can be "unfinalized", and if there is room, more tracks can be recorded.
During finalizing, no button works.
Never turn the power off nor unplug the power cord.
6. To erase the content of finalized CD-RW disc
Press "ERASE" on the unit, "unfin-d" will appear on screen, press Play/Pause
confirm unfinalizing.
Wait until "---busy" disappears, press "ERASE" button once, "Er" with a track numeber will
appear on screen, press Play/Pause
press "ERASE" button once
Press "ERASE" button twice, "Er All" will appear on screen, press Play/Pause
start erasing all tracks, after completing erasing, it will show as below figure.
press "ERASE" button twice
NOTE: Please press the "POWER" button to restart the unit if there is any wrong operation
resulting in crash.
All manuals and user guides at all-guides.com
NO TOC CD-RW AUTO TRACK
R+L
button to stop recording, then press "CD" button to switch
button to start erasing the single track.
CD
NO TOC CD-RW
CD
NO TOC CD-RW
TAPE
db -30 -12 -6 -3 0 OVER
press button
NO TOC CD-RW
press button
NO TOC CD-RW
27
button to
TR CD
button to
TR CD