Listening To The Radio; Aux Operation - Sylvania SRCD844 Mode D'emploi

1.Select FM or AM using the FM/AM button.
AM/FM
2.Tune to the desired frequency.
TUNING
If the reception is poor
AM broadcast
Turn around the unit to find the best position for AM stations.
FM broadcast
Extend and turn around the FM antenna so that you can receive the station clearly.
Press the AUX/BT button repeatedly to switch to AUX mode to listen through external audio player connected
through the LINE IN/AUX IN jacks.
LINE IN:
1. Plug one end of RCA cable(R/L) to the AUX OUT/LINE OUT jacks (R/L) of the external audio player(eg: DVD player).
2. Plug the other end of RCA cable (R/L) to the LINE IN jacks(R/L)on the rear side of the unit.
AUX IN:
1. Plug one end of 3.5mm audio cable to the AUX OUT/LINE OUT jacks of the external audio player(eg: Phone).
2. Plug the other end of 3.5mm audio cable to the AUX IN jacks on the front side of the unit.
NOTE: During LINE IN playing, please do not plug in AUX IN jack, or the LINE IN playing will be cut off. NOTE: During LINE IN playing, please do not plug in AUX IN jack, or the LINE IN playing will be cut off.
All manuals and user guides at all-guides.com

LISTENING TO THE RADIO

AUX OPERATION

16