osann Jazzi PS Mode D'emploi page 23

A
with Isofix
Follow the
positioned
een
C
1. Fasten the child car seat using the Isofix connectors (optional).
2. Now thread the diagonal belt through the car's 3-point belt guide on the head support of the
child car seat (Fig. A).
3. Put your child in the child car seat(Fig. B).
4. Adjust the height of the head support so that the child's head is completely positioned in the
head support and the diagonal belt exits the belt guide at the child's shoulder height (Fig. C).
5. Close the belt buckle of the car's 3-point belt again until you hear a click. Make sure that
the diagonal belt is positioned above the armrest and the pelvic restraint underneath each
armrest (Fig. D).
6. Pull the diagonal strap in order to tighten it. Ensure that the straps are not twisted.
- 23 -
B
D
EN