osann Jazzi PS Mode D'emploi page 19

Isofix connectors
For ECE Group 2/3, 15-36 kg
t the • Insert the insertion aids into the slit in the cushion between the backrest and seat and into
the Isofix holders (Fig. A).
• When doing this, the flat side must be facing downward. This step is not necessary if the
vehicle already has firmly installed insertion aids.
be set
• Pull on the lever at the front underneath the seat to pull out the Isofix connector blocks at the
back of the child car seat (Fig. B & C).
• Now unscrew the Isofix connectors from the block (Fig. D).
• Slide the Isofix connectors into the insertion aids and press them in until you hear these lock
in place (Fig. E).
• The indicators on both sides only show green when the connections are in place.
A
D
- 19 -
B
E
EN
C