osann Jazzi PS Mode D'emploi page 21

INSTALLATION OF THE CHILD CAR SEAT
Group 1 (forward-facing)
(For children from 9 to 18 kg, installation with 3-point seat belt & impact shield)
cks at the 1. Place the child car seat on the intended seat in the car.
with 2. Put your child in the child car seat.
3. Adjust the head support as described above.
d car seat 4. Position the impact shield and use the two adjustment buttons to adjust it until it is as close
est. to the child's body as possible (Fig. A).
s seat. 5. Take the car's 3-point seat belt and extend it to the maximum length.
6. Now thread the diagonal belt through the car's 3-point belt guide on the head support of the
child car seat (Fig. B).
7. Now place the 3-point seat belt around the impact shield, making sure that it is threaded into
the belt guide of the impact shield (Fig. C).
8. Close the belt buckle of the car's 3-point belt again until you hear a click (Fig. B).
9. Now pull the 3-point seat belt as tight as possible and make sure that the child car seat is
pressed firmly against the backrest of the car's seat.
A
C
- 21 -
B
D
EN