Function Keys
•
Mode: To select the desired function. Press and hold for 4 seconds to reset
all function values (except odometer).
•
Set: Enter the setpoint (except odometer).
•
Reset: To reset the value (except odometer).
Note: The monitor is automatically turned off when no signal is received
for 4 minutes. The monitor is automatically powered when you start the
exercise or press the button.
Functions
TIME (TMR): Automatic storage of training time during training.
•
SPEED (SPD): Display of the current speed.
•
•
DISTANCE (DST): Accumulate the distances during training.
CALORIES (CAL): Automatic storage of calories burned during training.
•
ODOMETER (TOTAL): Display of the total distance during training. If you
•
train again, the distance covered will be added to the total distance. The
odometer cannot be reset unless you replace the battery.
•
PULSE: Indicates the user's heart rate per minute. This requires an
uncoded 5.3 kHz heart rate chest strap.
SCAN: Displays the values of the functions in the following order: Time >
•
Speed > Distance > Calories > Pulse > Odometer.
SPM (Strokes per Minute): Indication of rowing strokes per minute
•
(stroke rate).
•
STROKES: Indication of the total number of rowing strokes.
Note: If the display on the monitor is incorrect or difficult to see, replace
the batteries. Always replace all batteries.
EN
43