Setting Rinse + Spin, Rinse + Spin; Setting Spin Only, Spin Only; Setting Soak, Soak; Saving Energy, Coldwash - LG WT1201C Serie Manuel D'utilisation

Machine à laver
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Setting RINSE + SPIN,
Select this option to rinse and spin a load separately from a
regular cycle. This can be helpful in preventing fresh stains
from setting in fabrics. You can change spin speed by
pressing SPIN SPEED repeatedly until the desired speed is
selected.
1
Press the POWER button to turn on the washer.
2
Press the
button until the RINSE+SPIN indicator light
is lit. (The cycle light will turn off.)
3
Press the
button to start the cycle. The washer will
start automatically.
Setting SPIN ONLY,
This button activates the SPIN ONLY cycle to drain and spin.
1
Press the POWER button to turn on the washer.
2
Press the
button repeatedly until the SPIN ONLY
indicator light is lit.
3
Press the
button to start the cycle. The washer will
start automatically.
Setting soak,
SOAK
Helps removes stains by adding a soak time before the end
of the cycle. The cycle time will increase by 3o minutes. The
agitation of the washer will be weaker during a Soak cycle.
NOTE
y You cannot select the Soak option during the Tub Clean
cycle.
RINSE + SPIN
SPIN ONLY
USING YOUR WASHING MACHINE
Saving energy,
COLDWASH™
For maximum efficiency, wash only small loads. (less than 8
lbs.)
NOTE
y Press and hold the COLDWASH™ button for three
second to activate or deactivate SIGNAL. SIGNAL is the
melody and button tones.
1
Press
, and press
desired cycle is selected.
2
Press
The washer will automatically adjust the cycle
settings.
3
Set any other desired options.
4
Press
.
NOTE
y When you select the COLDWASH™ option, wash time
will be increased up to 10 minutes.
y For high wash dfficiency, it is recommended to use
less than 8 pounds.
Adding extra rinse cycle,
You can add an extra rinse cycle to the default rinse cycle.
1
Press
, and press
desired cycle is selected.
2
Press
.
3
Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
4
Press
.
Setting fabric softener of laundry,
SOFTENER
The fabric softener is dispensed in the final rinse. Select
FABRIC SOFTENER button to change final rinse type from
spray rinse to rinse.
NOTE
y When using the EXTRA RINSE option, the fabric
softener will always be dispensed in the final rinse.
25
repeatedly until the
EXTRA RINSE
repeatedly until the
FABRIC

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Wt1101c serie

Table des Matières