Honeywell Home H8908A Instructions D'installation page 3

Fig. 7. Run wire to the mounting location.
4. Remove the base bracket from the humidistat.
For duct mount, slide the black gasket onto the
base bracket. See Fig. 8.
NOTE: Use gasket only when mounting the control to
ductwork. Leave off when mounting to a wall.
H8908A/B HUMIDISTAT; H8908C/D DEHUMIDISTAT
M24721
5. Secure the base bracket to the duct or remote
location. Secure to the duct with four 1-in. (25
mm) screws (provided) or to the wall with two 1-
in. (25 mm) screws (provided).
Fig. 9. Mount base bracket to duct or remote
3
Fig. 8. Seal base bracket.
location.
M24733
M24722
69-1341EF—09