Gewiss Chorus GW90871 Mode D'emploi page 21

Suggested values are 2-40.
Downwards Dimming Curve:
Address: 1554
Set dimming down to 100%.
When the automatic dimming function is chosen, the command „0001b" (100% dim down) is received and the
programmed dimming setting will be repeated (see Repetition Rate Object 1553) until 0 has been reached
or until it is manually stopped.
Standard setting „0111b" = -1%
Possible dimming values as 4 bit object, see table 1
Upwards Dimming Curve:
Address: 1555
Set dimming up to 100%.
When the automatic dimming function is chosen, the command "1001h" (100% dim up)is received and the
programmed dimming setting will be repeated (see Repetition Rate Object 1553) until 255 has been reached,
or until it is manually stopped.
Standard setting „1111b" =+1%
Possible dimming values as 4 bit object, see table 1
Activate Automatic Dimming:
Address: 1556
Automatic Dimming
Standard setting 0 if S3=0, otherwise 1
0 = automatic dimming switches off, no repetition of dimming.
1= automatic dimming switches on, repetition of dimming.
with DPT 3.007 4 bit Value (Dimming)
with DPT 3.007 4 bit Value (Dimming)
with DPT 1.001 1 bit Value (Switching)
21