Arzum OKKA grandio bold Manuel D'instructions page 28

machine receives water and the measurement mode starts.
h. During the process, the appliance will perform the boiling
process with at least 4 cups of water. After the boiling process, the
measurement process ends with sound and light warning.
WARNING: Coffee pot is placed emptily without coffee and sugar.
WARNING: In case of a problem during automatic boiling point
measurement, restart your appliance and restart the process.
WARNING: If the coffee pot is removed or the appliance is closed
before the measurement mode ends, start the process from the
beginnin.
WARNING: During the measurement of boiling point, water droplets
may form on the touch panel and surfaces due to water boiling in the
pot. After boiling, wipe and dry the water droplets with a dry cloth.
In the cases where manual boiling point measurement should performed;
• In case the coffee pot and/or board are changed for any reason by
the service after the automatic measurement,
• Change of the altitude where the product is used (city, change
address, etc...)
• In case of a problem in the automatic measurement.
WARNING: Make sure tank container and tank slot surfaces are dry
while placing the water tank. Otherwise water drops accumulated
around this area may prevent correct detection of water amount by the
water detection system in the tank.
AMBIANTE LIGHTING
OKKA Grandio Bold has a stylish image with ambience lighting on
the coffee pot. Provides ease of use where the ambient light is not
sufficient.
28 ARZUM OKKA GRANDIO BOLD