Arzum OKKA grandio bold Manuel D'instructions page 27

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 56
BREWING POINT (AUTO BOILING ALTITUDE DETECTION) AND
BOILING POINT MEASUREMENT SETTING
Arzum OKKA Grandio Bold has a smart auto brewing altitude detection
system enabling you to make Turkish coffee with the same flavor
anywhere in the world, by determining the ideal boiling temperature in
the place where it is present.
The boiling point of the water depends on the altitude difference based
on the sea level. The appliance automatically determines the boiling
point. On the initial use, the appliance performs the automatic boiling
point measurement and sets the boiling point based on its altitude
for the ideal flavor. The boiling point should be set again when the
altitude difference based on the sea level changes: The boiling point
measurement is made by means of 2 different ways,
1. Automatic Boiling Point Measurement;
a. Plug in the appliance .
b. Before the initial use of the appliance , place the water tank into its
slot by filling maximum level of water.
c. Put the appliance in on (I) position.
d. If the coffee pot is in its place, automatic measuring will start.
If the coffee pot is not its place, automatic measuring will start when
the pot is put in its place.
WARNING: Coffee pot must be used without coffee and sugar during
automatic measuring performed in the first use of the appliance .
e. During the process, the appliance will perform the boiling
process with at least 4 cups of water. After the boiling process, the
measurement process ends with sound and light warning.
*The automatic boiling point measurement might take approximately
5 minutes.
2. Manual Boiling Point Measurement;
a. After plugging in the appliance , activate the power key (I).
b. Before the initial use of the appliance, place the water tank into its
slot by filling maximum level of water.
c. Remove the coffee pot from its slot.
*The coffee pot should not be in its slot during the process.
d. Press the 1 cup key on the touch panel for 5 seconds.
*The warning sound occurs after 5 seconds.
e. Press the 4 cup key once. (It should be pressed in 5 seconds.)
f. All leds on the touch panel flash and indicate that the measurement
mode is activated.
g. When the coffee pot is placed into its slot in 30 seconds, the
ARZUM OKKA GRANDIO BOLD
EN
27

Publicité

Table des Matières
loading

Table des Matières