Teletext; Tips - Philips 14PF6826/58 Mode D'emploi

Teletext

Teletext is an information system broadcast by certain channels which can be consulted like a newspaper.
It also offers access to subtitles for viewers with hearing problems or who are not familiar with the
transmission language (cable networks, satellite channels, etc.).
.
Y ` ù
ı
SMART SMART
-
ª
¤
MENU
+ +
" [
- - P
1 2 3
4 5 6
7 8 9
Á
Ë 0

Tips

Poor reception
The proximity of mountains or high buildings may be
responsible for ghost pictures, echoing or shadows. In
this case, try manually adjusting your picture: see Fine
Tune (p.6) or modify the orientation of the outside
aerial. Does your antenna enable you to receive
broadcasts in this frequency range (UHF or VHF band)?
No picture
Have you connected the aerial socket properly? Have you
chosen the right system? (p. 6). Poorly connected
euroconnector cables or aerial sockets are often the cause
of picture or sound problems. Check all connections.
No sound
If on certain channels you receive a picture but no
sound, this means that you do not have the correct TV
system. Modify the System setting (p. 6).
The amplifier connected to the TV does not deliver any
8
Press :
Teletext This is used to call teletext, change to transparent mode and
¤
on/off then exit.The summary appears with a list of items that can be
accessed. Each item has a corresponding 3 digit page number.
If the channel selected does not broadcast teletext, the
indication 100 will be displayed and the screen will remain blank
(in this case, exit teletext and select another channel).
Selecting Enter the number of the page required using the
0
9
a page or
P
number is displayed top left, the counter turns and then the
page is displayed. Repeat this operation to view another page.
If the counter continues to search, this means that the page is
not transmitted. Select another number.
Coloured areas are displayed at the bottom of the screen.
Direct
access to The 4 coloured keys are used to access the items or
the items corresponding pages.
The coloured areas flash when the item or the page is not yet available.
This returns you to the contents page (usually page 100).
Ë Contents
Enlarge This allows you to display the top or bottom part of the
a page page and then return to normal size.
Certain pages contain sub-pages which are automatically
Stop sub-page
acquisition displayed successively.This key is used to stop or resume
sub-page acquisition.The indication
To display or hide the concealed information (games solutions).
Hidden
Y
information
Direct selection This allows you to select teletext sub-page.
`
of a sub-page
This is used to temporarily disable or activate the
Temporary
ı
stop teletext display.
sound? Check that you have not confused the audio
output with the audio input.
Standby
If the set receives no signal for 15 mins, it automatically
goes into standby mode.
To save power, your set is fitted with components that
give it a very low power consumption when in standby
mode (less than 2 W).
Cleaning the set
Only use a clean, soft and lint-free cloth to clean the
screen and the casing of your set. Do not use alcohol-
based or solvent-based products.
Still no results?
Disconnect the mains plug of the TV for 30 seconds
then reconnect it.
If your TV set breaks down, never attempt to repair it
yourself: contact your dealer's after-sales service.
You will obtain:
@ P #
keys. Example: page 120, enter
0 9
to
1 2 0
.The
_
appears top left.