Specifications; In-Car Mounting - Sylvania SDVD8728-Black Mode D'emploi

Specifications

Power Requirement DC 9-12V
? ?
? ?
? ?
? ?
Dimensions(mm) 270 W)*178((D)*41(H)mm
W . h
? 7 5 ? h ? W & H h
J H ? h
? J H h e 7 5 h e
? 7 ? h e
? ? ? ? ? ? h e ? ? h e
? ? h e
? ? h e ? ? h e
? 3 ? h e ? ? h e
? N L h e
? ? N L ? h 3 1 h e
? ? ? 3 1 ? h
? V ' L h V / h
Display: 7.0"16:9 (TFT LCD)
Resolution: 480 by 234(RGB)
DAC: Audio 24 bit/96KHz, video 10bits
Power Out: 9VDC-12VDC
Remote Control: Slim Card IR Remote Control
Operating temperature: 0°C to 45°C
Operating humidity: 25% to 80%
OUTPUTS SOCKET TYPE OUTPUT LEVEL
Audio Out Mini Socket 1.0-2.0V rms@50K Ohms
Video Out Mini Socket 1.0 +/- 0.2V p-p75 Ohms
2 Headphone 3.5mm Socket
Due to continual improvements to products these
specifications are subject to change without notice.
LOAD IMPEDANCE
Over 10k Ohms
Sync Negative
40 mW 16 Ohms
GB-31

IN-CAR MOUNTING

1.Unfasten all velcro straps of the harness
2.Wrap the strap around the second screen and fasten the
two velcros at back to tighten the unit securely
3.Ensure the front horizontal strap is in the correct position so
that it does not cover the screen
4.Wrap the strap around the head rest and secure into
position using the velcro straps
GB-32