Polaris GLACIER III Manuel D'installation page 16

"GLACIER III" PLOW FRAME
KIT PN 2878228
PUSHFRAME INSTALLATION AND REMOVAL
PUSHFRAME INSTALLATION:
1. Move the vehicle towards the pushframe assembly.
Make sure to align the pushframe with the vehicle.
2. Grab the top center of the blade and raise the hook-
up (A) until it latches onto the front part of the
mounting kit (B). Verify that the pivots of the hook-
up is fully engaged with the mounting kit (B) before
attempting to use plow.
3. Connect the hook of the winch onto the winch link
(C).
4. With the winch, raise until the rear part of the
pushframe latches onto the rear part of the mounting
kit (B).
5. Manually lift the blade of approximately 4" and let
fall in order to assure you that the rear part of the
pushframe latches onto the rear part of the mount
plate (#B).
PUSHFRAME REMOVE:
1. Lower the pushframe using the winch. Remove the
hook of the winch onto the winch link (C).
2. Grab the hook-up (A) and pull the release handle
(D). The release handle desengage the rear part of the
pushframe to the mounting kit (B).
3. Pull the hook-up (A) forward to desengage the front
part of the pushframe completely to the mounting kit
(B).
7515095
A-7515095 Rév. A
- 8 -
Imprimé en Chine / Printed in China