Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
"GLACIER III" PLOW FRAME
KIT PN 2878228
OPERATION
To adjust the blade angle for plowing to the side, raise Blade
just to clear the ground. Pull the Angle Lever forward and
pivot blade to the desired position. The Angle Lever will lock
into place when the blade is at the correct angle.
IMPORTANT : Not to attempt to angle blade at full lift, as
it is not possible. When blade is angled right or left the pivot
is tight against the mounting kit, making it not possible to
angle.
The Blade is designed to trip when it hits a solid object or digs in too far. When the pressure is released the Blade
springs back into position. Blade Spring tension may be set stiffer by tightening the Nylock Nuts on the bottom of the
Eye Bolts. For less spring tension, loosen the Nylock Nuts.
7515095
A-7515095 Rév. A
Turn the four position Adjustable Blade Stops to the desired
position making the Blade more or less aggressive.
- 4 -
Imprimé en Chine / Printed in China
Publicité
Table des Matières
