Ce Declaration Of Conformity - Corradi Ermetika Manuel Utilisateur

CE DECLARATION OF CONFORMITY

The following CE Declaration of Conformity is subordinated to the observance of constraints and indications in the product warranty, as well as the correct installation done by the person in
charge in accordance with the installation and lay-out instructions established by Corradi Spa.
Costruttore:
Corradi Spa
Via G. Brini, 39 - 40128 Bolgna Italy
Descrizione del prodotto:
ERMETIKA
Modello:
ERMETIKA
Numero di matricola:
(see CE marking on product)
Anno di fabbricazione:
(see CE marking on product)
Destinazione d'uso:
(see Userhandbook-Original Instructions and concerning Warranty)
With the following document the company declares on its own responsibility, that the above
mentioned product satisfies the Directives indicated on the side:
INDICATION / CONDITIONS TO WHICH THE USAGE OF THE PRODUCT IS SUBJECT:
The CORRADI product is subject to the installation activity done for the Client.
The Authorized Installer has to draw up and hand over the suitable DECLARATION OF CORRECT INSTALLATION AND CLASSIFICATION OF WIND RESISTANCE to the user, which testifies the
correct installation, in accordance with the instructions supplied by the manufacturer and applied in accordance with the state and morphology of the installation site and corresponding
to the using conditions for which it has been realized.
The Installer has to follow the reference instructions in the "INSTALLATION HANDBOOK" and "USER HANDBOOK" .
The Installer fills out and signs the DECLARATION OF CORRECT INSTALLATION AND CLASSIFICATION OF WIND RESISTANCE, in accordance with the model in the USER HANDBOOK.
The person authorised to draw up technical documentation is: Eng. Gianmarco Biagi C/o sede Corradi via Brini, 39 40128 Bologna
THE MANUFACTURER
I declare that the above described product conforms to the indications and requirements in the above mentioned Directives.
CHIEF EXECUTIVE OFFICER
Ing. Gianmarco Biagi
(*) Directives exclusively applicable to products with motorizations and automations [see User Handbook ]
(**) Wind resistance class: the wind resistance class has been verified using installation supports with features as in the Load table in the User Handbook.
30 of 76
REFERENCE DIRECTIVES appliable to the following CE Declaration of
Conformity
Construction Production Directive 89/106/CEE;
Electromagnetic Compatibility Directive2004/108/CE(*);
Machinery Directive 2006/42/CE(*);
Low Voltage Directive 2006/95/CE(*);
The conformity has been verified with the aid of the following norms:
- Performance requirements, safety included UNI EN 13561:2009
- Wind resistance class: Class 3(**) (method according to UNI EN 1932: 2002);
CORRADI SPA -
USER MANUAL - ERMETIKA® 09.05.2013