Warnings And Precautions - Corradi Ermetika Manuel Utilisateur

WARNINGS AND PRECAUTIONS

PRELIMINARY CHECKS
When you receive the packaged goods, if assembly is not to be
carried out by the dealer, check that all materials are intact and that
no parts are missing.
If you should have any problems, contact the authorised dealer.
DISPOSING OF PACKAGING
Separate the various packaging materials into their different
categories (cardboard, nylon, polystyrene, etc.) and dispose of them
as local regulations require.
GENERAL WARNINGS
Before carrying out any assembly or maintenance work or cleaning,
make sure that you have understood the instructions in this manual.
All Corradi products have a specific function as described in
this manual; any use that is improper or different from the one
foreseen, the use of parts that are not genuine, tampering and/or
unauthorised technical modification will free Corradi SpA from any
responsibility for damage to persons, animals or things.
Installers (fitters and electricians) must have specific expertise as
well as the attitudinal and the physical and mental requirements to
be able to carry out their tasks; they must also respect the safety
regulations in force.
18 of 76
SAFETY PRECAUTIONS
It is good practice to remember that moving parts can be a hazard.
During all maintenance and repair operations or product registration,
the electric supply must always be disconnected.
It is also advisable to place a warning sign over the mains supply
switch with the following phrase:
"DO NOT TOUCH: work in progress".
Check that no one is near the awning before turning it on again
after maintenance work. After maintenance, always make sure
that manual and electric drives are properly assembled and that
they work correctly; should you encounter any problems stop the
awning immediately and contact Corradi SpA's technical assistance
department.
CORRADI SPA -
USER MANUAL - ERMETIKA®
DEMOLITION
On demolition, the parts should be sorted into plastic material
and electric components, which must be disposed of separately in
accordance with the regulations in force.
The awning's metal parts only need to be divided into steel parts
and those made of other metals and alloys, in order to be forwarded
to be melted down and recycled.
09.05.2013