Corradi Ermetika Manuel Utilisateur page 27

WARRANTY
ERMETIKA® is a roller awning used for covering external areas
such as pergolas, balconies, rooftop gardens, greenhouses, etc.
ERMETIKA® (registered trademark) and its components are
designed and patented by Corradi SpA - Bologna, Italy - and have
been manufactured in accordance with applicable technical
standards.
The warranties hereunder are valid if installation and use of the
awning conform to the specifications indicated in the articles
and tables below. Only the finest materials, suited to outdoor use,
have been used in the manufacture of ERMETIKA® components.
The warranty is only valid if the following conditions are
observed:
A) The installation is performed by competent technicians
authorised by Corradi SpA;
B) The use of ERMETIKA® complies with the intended uses
identified by the manufacturer.
The warranty will be void:
• by failure to respect points A and B let alone art. 3;
• in the event of electric manoeuvring, if the voltage
undergoes a variation of between 95% and 105% of the
rated value (IEC standard 2-3 July 1988);
• by damage caused by objects falling on it or natural causes
(lightening etc.) or Acts of God;
• by damage caused by unauthorised personnel;
• if maintenance is carried out by unauthorised personnel.
Corradi SpA reserves the right to modify its products at any time,
at its own discretion and without prior warning.
Any modifications brought about by the end user or
technicians not authorised by Corradi SpA (tampering, technical
modifications, etc.) to ERMETIKA® or its components during the
warranty period, will render the warranty void immediately;
09.05.2013
in this case and these conditions Corradi SpA is excluded of all
responsibility and any direct or indirect consequential obligation.
ART. 1 -MODELS:
ERMETIKA® must be vertically applied to a suitable supporting
wall.
ART. 2 - USE:
ERMETIKA® is a product made to customer specifications by
Corradi SpA and delivered to the authorised dealer ready for
installation. No cutting or adjustment needs to be carried out by
the installers.
It can be used in the event of winds up to the degree indicated
in Table 1 (page 28). ERMETIKA® is classified to Class 3 according
to UNI EN 13561, see Table 1 (page 28).
ART. 3 -INSTALLATION:
ERMETIKA® shall always be fixed to a suitable supporting structure
(wall, wood, metal) and all of the installation conditions described
in the Installation Manual shall be complied with. The end user
shall be given the "User's manual and maintenance handbook".
ART. 4 - WARRANTY VALIDITY
The warranty is only valid if the installation and utilisation
conditions as specified in art. 3 are observed.
The warranty covers the repair or entire replacement free
of charge (labour excluded) of all components that may be
nonconforming or faulty, including transport charges. Damage
from non-enjoyment of ERMETIKA 2010 for any period of nonuse
before and during the repair shall not be covered.
No compensation may be claimed for "actual damages or lost
profit".
The above mentioned warranty will be effective only in the state
in which the retailer or the concessionaire has his own office.
CORRADI SPA -
USER MANUAL
ART. 5 - WARRANTY STARTING POINT:
The warranty starts from the date on which work ends with
delivery of the User Manual and, in any case, from the date on
which Corradi Spa receives copy of the declaration of correct
installation complete in all its parts and signed by the end buyer
and by the authorised retailer.
ART. 6 - WARRANTY EXCLUSIONS:
The warranty is not valid in the cases listed below, by way of
illustrative and non-limiting example:
a) For damage arising from impact or extraordinary natural events
(lightning, flooding, earthquake, hail, etc.);
b) For damage caused by the actions of persons or technicians
not authorised by Corradi Spa;
c) If the electrical voltage has a variation above or below 5% of
the rated value (IEC standard 2-3 July 1988);
ART. 7 - RUNNERS AND CASSETTE
5-Year Warranty:
The runners and the cassette are in hot varnished UNI 6060
aluminium alloy, pre-treated according to stringent procedures
as required for example by the "qualicoat" quality mark for
maximum durability. The varnish can last for a considerable time
(more than 20 years), but may be affected by critical weather
conditions, such as proximity to the sea or acid rain with heavy
chemical pollution. The warranty covers these critical conditions.
ERMETIKA® is classified to Class 3 (UNI EN 13561) for the durability
of aluminium components.
- ERMETIKA® 27 of 76