Table des Matières
Publicité
Torque
Before you start the fitting you must check the type plate to determine
which sketch, in the fitting instruction, is applicable.
1. M10x40 (10.9)
*******M* E: 45 Nm
2. M12x40 (10.9)
*******M* E: 120 Nm
3. M12x160 (8.8)
*******M* E: 85 Nm
*******M* P: 45 Nm
*******M* P: 105 Nm
*******M* P: 75 Nm
© 4019370/26-04-2022/7
Publicité
Table des Matières
