Started And Setup; Setup Wizard; Auto-Update - Artsound R4 Mode D'emploi

Menus
R4 has basically three types of menu. Use the Se-
lect control to step through and select options. A
scroll bar on the right of the screen shows if there
are further options above or below those visible.
Each mode has a Mode menu, with options specif-
ic to that mode.
For example, the FM mode menu has just two
options: Scan setting and Audiosetting.
In addition, each mode menu has two final op-
tions:
System settings > and Main menu >.The '>'
indicates options leading to
further menus.
The System settings menu allows access to
system settings and information such as network,
time, language and software update.
Menus with more options than will fit on one
screen have a scroll bar to the right.
The Main menu allows access to all modes plus
sleep and timer functions.
Some menus, for example the System settings
menu, have several submenus.
42

3 Started and setup

R4 is easy to use. To play DAB or FM radio, all
you need is a power source (a 100-240 V mains
supply); For Music Player mode, you need a wired/
wireless Ethernet network and a UPnP music
server (e.g. a PC). For Internet-connected modes
such as Internet radio, you also need a broadband
Internet connection.
Slide the button for the first time behind the
battery to activate it.

3.1 Setup wizard

When R4 is started for the first time, it runs
through a setup wizard to configure settings for
date/time and network. Once this has finished, the
system is ready to use in most modes.
Note: To change these settings later, select Menu
> System settings >.
To run the setup wizard again, select Menu >
System settings > Setup wizard.
Select Yes to start the setup wizard.
If you choose No, the next screen asks if you
would like to run the wizard next time R4 Is start-
ed. The system then starts without configuring
time/date and network settings and enters the
Main Menu.
Note: If power is removed while the wizard is in
progress, the wizard will run again next time R4 is
started.
3.1.1 12/24 hour display
To change between 12 and 24 hour display, select
Set 12/24 hour and then select your preference.
3.1.2 Time/date
The time and date can be updated manually or
automatically. With auto-update, the time and
date are automatically synchronized with external
clocks. Auto-update is generally more accurate.

Auto-update

Auto-update works with data sent over DAB, FM
or the Internet. The clock is only updated when
in a corresponding mode, so it is best to select a
mode you use regularly.
DAB and FM use time signals broadcast with radio
transmissions.