Paradigm SURROUND 1 Mode D'emploi page 4

IMPORTANT: Read before wall mounting your surround speakers.
Paradigm DOES NOT supply hardware for
mounting speakers to the wall. Use screws
which are appropriate for wall type and weight
of speakers.
If installing into drywall, install into 1/2˝ (13 mm)
or 5/8˝ (16 mm) drywall only. Screws must be long
enough to go through anchor bolts (not supplied).
NON-LIABILITY: We are aware that the wall mounting
assemblies sold separately, for use with Paradigm Surround
speakers could be used for purposes and in ways other
than those for which they were intended. The manufacturer,
distributor, retailer and their respective agents cannot
be held responsible or liable for injuries or property
damage — direct, indirect, or consequential — arising
from the use of or inability to use these products safely
and properly. Every effort has been made to provide accurate,
error-free installation instructions. Paradigm Electronics
Inc. disclaims liability for difficulties that may arise from
the misinterpretation of information contained in these
instructions.
IMPORTANT: Read before placing surround speakers on flat surface.
For stability, bumper pads (included) must be used
when placing surround/rear speakers on a flat
surface. Please see the section on "Placement:
Surround / Rear Speakers" for more info.
Autogoods "130"