ISE SY-5430B Manuel D'utilisation page 3

ASSEMBLY INSTRUCTIONS
STEP 1:
1. Attach the Rear Upright (R&L) (2&3) to the Rear Base (1), using four
M10X55mm Hex Bolts (37), eight M10 Washers (41) and four M10 Nylon
Nuts (44).
2. Attach the Cross Support (4) to the Rear Upright (R&L) (2&3), using four
M10X55mm Hex Bolts (37), eight M10 Washers (41) and four M10 Nylon
Nuts (44).
3. Insert the Barbell Support (12) into the Rear Upright (R&L) (2&3), using two
Locking Knobs (short) (22) and two Safety Hooks (19).
4. Attach the Safety Hook (R&L) (17&18) to the Barbell Support (12), using two
M6 Washers (43) and two M6 Nylon Nuts (45).
43
17
45
12
22
19
2
41
37
41
44
41
37 41
41
44
41
41
44
41
41
1
45
43
18
12
4
19
44
41
3
41
44
41
41
44
37
41
41
37
41
-2-
22