Salta Excellent Ground Manuel Utilisateur page 6

G. Beat the L-Nail (4) into the ground as showed in the visual.
H. Insert the 'Lower Steel Tube' (1) into the 'Ground Plug' (3).
I. 1. Push the spring button and attach the 'Lower Steel Tube' to the 'Ground Plug'
2. Once the tubes are attached, ensure the spring button comes out the hole of the tube.
J. Insert Upper Steel Tube(2) into Lower Steel Tube(1) with Plastic Cap(6) in order, as shown
K. Put the pole sleeve (11) carefully over the steel tubes
L. The pole sleeve should cover the all the foam of the safety tubes
G
J
6
3
H
1
3
K
11
2
1
I
1
2
L
GB