Salta Excellent Ground Manuel Utilisateur page 5

A. Apply the 'Pressboard Carton' (10) on top of the 'Ground plug' (3) and use the
'Installation tool' (7) to put on top of the 'Pressboard carton' for protection of the 'Ground Plug'.
B. Hold the 'Ground Plug' with a horizontal distance from 5cm near the leg base of the
trampoline and ensure you keep the 'Ground Plug' in straight vertical direction (90 degrees).
Then use a (rubber) hammer to beat the 'Ground Plug' into the ground.
C. Once the 'Ground plug' is below the top rail of the trampoline then twist the 'Ground Plug' 90
degrees towards the trampoline.
D. Then beat the 'Ground Plug' further into the ground and ensure you hold the ground plug
straight 90 degrees in vertical direction.
E. Ensure the arch of the 'Ground Plug' fits around the 'Leg Base' of the trampoline
F. Once the 'Ground Plug' is installed remove the 'Installation tool' (7) and 'Pressboard Carton'
(10) repeat this to install the other 'Ground Plugs'.
A
7
10
3
D
B
90°
5CM
E
C
90°
F
7
10
GB GB
2