Residual Risks; Machine Information; Technical Specifications - VONROC CD504DC Traduction De La Notice Originale

RESIDUAL RISKS

Even when the power tool is used as prescribed it
is not possible to eliminate all residual risk factors.
The following hazards may arise in connection with
the power tool's construction and design:
a) Health defects resulting from vibration emission
if the power tool is being used over longer
period of time or not adequately managed and
properly maintained.
b) Injuries and damage to property to due to bro-
ken accessories that are suddenly dashed.
Warning! This power tool produces an
electromagnetic fi eld during operation. This
fi eld may under some circumstances
interfere with active or passive medical
implants. To reduce the risk of serious or
fatal injury, we recommend persons with
medical implants to consult their physician
and the medical implant manufacturer
before operating this power tool.
Electrical safety
Always check that the voltage of the power
supply corresponds to the voltage on the
rating plate.
• Do not use the machine if the mains cable or
the mains plug is damaged.
• Only use extension cables that are suitable
for the power rating of the machine with a
minimum thickness of 1.5 mm
tension cable reel, always fully unroll the cable.

2. MACHINE INFORMATION

Intended use
This cordless drill is intended for driving in and
loosening screws as well as for drilling in wood,
metal and plastic.

TECHNICAL SPECIFICATIONS

Model No.
Charger
Input of charger
Output of charger
Rechargeable battery pack
Battery charging time
WWW.VONROC.COM
Vibration level
The vibration emission level stated in this instruc-
tion manual has been measured in accordance
with a standardized test given in EN 62841; it may
be used to compare one tool with another and as
a preliminary assessment of exposure to vibration
when using the tool for the applications mentioned.
• Using the tool for different applications, or with
• The times when the tool is switched off or when
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work patterns.
DESCRIPTION
2 . If you use a ex- The numbers in the text refer to the diagrams on
pages 2 - 3
Fig. A
1. Machine
2. Battery
3. Battery unlock button
4. Work light
5. Charger
6. Charger LED indicator
7. Chuck
8. Gear selection switch
CD504DC
9. Direction switch
CD812AA
10. On / off switch
11. Torque adjustment ring
100-240V~ 50/60Hz
Max. 0.8A
17.5V DC 1.2A
16 V Li-ion 1.5Ah
60 minutes
Chuck capacity
Torque settings
No load speed
Position 1:
Position 2:
Weight (incl. battery)
Sound pressure level L
PA
Sound power level L
WA
Vibration
different or poorly maintained accessories, may
signifi cantly increase the exposure level.
it is running but not actually doing the job, may
signifi cantly reduce the exposure level.
EN
1.0 - 10 mm
17 + Drill mode
0-350 /min
0-1300 /min
1.1 kg
72.5 dB(A), K=5dB(A)
83.5 dB(A), K=5dB(A)
2.68m/s 2 K=1.5 m/s 2
7