Before Using For The First Time - Krups Perfect Mix 2000 Smoothie To Go Mode D'emploi

A Motor Unit
B Blender bottle assembly
B1 Blade unit
B2 Seal
B3 Plastic bottle
The safety precautions are part of the
appliance. Read them carefully before
using your new appliance for the first
time. Keep them in a place where you
can find and refer to them later on.
The appliance will not operate if the blender bottle assembly (B1 + B2 + B3) is not correctly
assembled and correctly positioned on the motor unit (A).

BEFORE USING FOR THE FIRST TIME

Before using for the first time wash the blender assembly (B) and lid assembly (C), in warm
water and a little washing-up liquid. ATTENTION: DO NOT IMMERSE THE MOTOR UNIT (A)
OR PUT IT UNDER WATER OR ANY OTHER LIQUID. Clean with a damp cloth then dry it
carefully.
WARNING: The cutter blades are extremely sharp, handle them with caution during
use, cleaning or on emptying the bottle. Do not fit the blade unit onto the motor unit
by itself.
Make sure that all packaging has been removed before operating the appliance.
This blender will allow you to discover a new world of textures: liquids, chopped fruits and
finely ground powders for culinary use. Using it, you can blend some simple ingredients to
obtain delicious recipes.
8
DESCRIPTION
CAUTION
SAFETY LOCKING SYSTEM
INTRODUCTION
C Lid Assembly
C1 Lid Seal
C2 Lid
D Plastic stick (for removing the lid seal)