Krups Perfect Mix 2000 Smoothie To Go Mode D'emploi page 11

3. Clean the seal and blade unit carefully (the blade unit only, without the seal, is
dishwasher safe) and replace the seal in the slot on the blade unit. Make sure
that the seal forms a tight seal around the base of the blade unit by pressing
it down with the blunt end of the plastic stick. There is a risk of leakage if the
seal is not correctly replaced.
WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK
PROBLEMS
The appliance does
not work.
Excessive vibration.
Leak from the bottle
The blade does not
rotate easily.
Is your appliance still not working?
Contact customer service (see contact details in the separate booklet).
CAUSE
It is not plugged in.
The bottle (B) is not
correctly assembled or
positioned on the motor
unit (A).
The appliance is not on
a flat, stable surface.
Volume of ingredients is
too high.
Error in assembling the
accessories.
Incorrect positioning
of the seal (B2) on the
blade unit (B1).
The blade unit (B1 +B2)
is insufficiently or
incorrectly locked on the
bottle (B3).
Pieces of food are too
big or too hard.
SOLUTIONS
Plug the appliance in using a plug with
the same voltage.
Check that the bottle is correctly
assembled; dismantle and assemble
again Fig.1 and Fig.2 and check that it
is far down enough on the motor unit.
Maintain pressure on the blender
bottle assembly (B) during operation
Fig.3.
Put the appliance on a flat stable
surface.
Reduce the quantity of ingredients
processed.
Check that the bottle (B3) is
correctly assembled with the blade
unit (B1+B2).
Make sure that the seal is correctly
positioned, the lips of the seal should
be visible and it should not be buckled
Handle the blade units (B1) with
care because the blades are sharp.
Make sure that the blade unit and the
bottle are fitted together correctly.
Reduce the size or quantity of the
ingredients processed.
Add liquid to the bottle without
exceeding the maximum level.
11