Connections; Burn-In Period; Specifications - Elipson HERITAGE XLS15 Manuel D'utilisation

EN
IV. CONNECTIONS
It is essential to connect the speakers using the correct polarity. Make sure
to connect the " + " terminal of the speaker (Red) to the " + " output
terminal of the amplifier. Then, make sure to connect the "- " terminal of
the speaker (Black) to the " - " output terminal of the amplifier. A wrong
connection would cause a cribled stereo image and loss of bass. Use high
quality speaker cable to perform.
V. BURN-IN PERIOD
When you take them out of the packaging, the Elipson loudspeakers are not
yet able to reproduce with the same efficiency all the sound frequencies they
are supposed to play. The loudspeakers are complex mechanical assemblies
which need a period of adaptation ("burn-in") to operate at their best and
become acclimatized to the temperature and humidity conditions of your
environment.
This burn-in period may last for some weeks, but you can quicken it by
operating the speakers between 100 and 150 hours consecutively, on a
moderate volume with a specific burning-in CD, or by broadcasting a radio
station.
16
VI. SPECIFICATIONS
Type Compact loudspeaker 3 way
Tweeter Silk dome 0.87''
Midrange Coated dome 2.2''
Woofer Cellulose pulp 12'
Bass load Bass reflex - front firing
Frequency response 40 - 25000 Hz +/- 3dB
Sensibility
92 dB / 1m /1W
Cut-off frequencies 700 Hz (12 dB - 12 dB ) & 5000 Hz (12 dB - 18 dB)
Tweeter and midrange level
- 1 dB / 0 dB (Ref) / + 1 dB
control - front plate
Nominal impedance 6 Ohms (min 3.2 Ohms @2400 Hz)
Recommended amplification 50 - 200 W
Power (RMS) 200 W
Dimensions (H x W x D)
730/700 x 420 x 339 mm
Net weight 28 kg
17