Connections - Elipson Infinite 8 Mode D'emploi

FR

CONNECTIONS

Speaker wire selection
Select high-quality speaker wire with the approriate cross-section and length.
Important : A connection error may cause poor stereo imaging and reduced bass performance. Any contact
between the wires may cause a short circuit, potentionally damaging your amplifier.
Make sure to connect the wires as follows :
• The «+» wire in the «+» connector of the speaker (Red) and the amplifier (Red).
• The «-» wire in the «-» connector of the speaker (Black) and the amplifier (Black).
Banana plugs
You can connect your cables to your loudspeakers using banana plugs. Banana plugs
facilitate the connection by ensuring that the speaker wires are inserted into the centre
of the amplifier's binding posts. They also offer long-term protection.
38
Spade connectors
Like banana plugs, spade connectors ensure a secure connection while maximizing
durability. To connect the speaker to the amplifier, tighten the spades onto the
appropriate connectors.
+1
-1
-2
+2
a b
SpeakON loudspeaker connectors
a/ For speakON connectors, connect the «+» wire to the «1+» speakON connector and
the «-» wire into the «1-» speakON connector.
b/ Insert the speakON male connector into the speaker's input and turn it clockwise to
lock it into place.
39