Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
FloTech FT555F Automatic Overfill System Tester
GROUND BOLT TEST
This test will test the Ground Bolt using the forward and reverse
test to confirm proper operation of the diode inside the ground bolt.
The tester will report a Pass/ Fail.
Step 1) Move the J-Slot thumb screws to the correct holes to match
the type of socket to be connected. Follow the "O" and "T"
markings on the plug body.
Step 2) Connect the FT555F Automatic Tester to the trailer socket.
Step 3) Press the ON/OFF button to turn on the FT555F Automatic
Tester. When "Press Key" screen appears press "TEST SELECT"
button four times so the "Ground Bolt Test" screen appears.
Step 4) Press the "GO" button to start the test. When the test is
complete the screen will display the PASS / FAIL status.
Step 5) Press the TEST SELECT" button to move on to a new test,
press "GO" to restart the test, or press the "ON/OFF" button to
turn the tester off.
FT555F Truck Tester
10784PA REV C
Page
15
Publicité
Table des Matières
