Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
FloTech FT555F Automatic Overfill System Tester
Introduction
This Manual describes the features, use and maintenance of the
FT555F Automatic Overfill System Tester. The FT555F is
compatible with all makes of Optic sensor systems, 2 wire
Thermo-Optic systems, and truck onboard monitor systems
regardless of manufacture as long as they are compatible with API
RP1004: 2003 recommended practice.
Main Features
The FloTech FT555F Automatic Overfill System Tester has the
following features:
-
Automatically test all 4 test functions, Optic, Thermistor,
Ground Bolt, and TIM number.
-
Test all API 5 wire optic sensor systems and report the
number of functional / wetted sensors.
-
Test 2 wire Thermo–Optic sensors and report the number
of functional / wetted sensors.
-
Monitors up to eight compartments.
-
Test Ground Bolts with both forward and reverse continuity
check.
-
Read TIM modules and report serial number in display
Has "WET TEST" mode with alarm to report when sensors
-
are wetted.
-
Set up screen to configure which of the four tests are
enabled and will configure maximum number of
compartments by region.
-
Software can be upgraded to include new tests and future
expanded testing and troubleshooting capability.
FT555F Truck Tester
10784PA REV C
Page 3
Publicité
Table des Matières
