Installation Steps; Package Contents - Axis M1011 Guide D'installation

AXIS M1011/M1011-W/M1031-W Installation Guide
AXIS M1011/-W & AXIS M1031-W
This installation guide provides instructions for installing the AXIS M1011/-W / AXIS M1031-W
Network Camera on your network. For all other aspects of using the product, please see the User's
Manual, available on the CD included in this package, or from www.axis.com/techsup

Installation steps

1. Check the package contents against the list below.
2. Hardware overview. See page 4.
3. Install the hardware. See page 5.
4. Assign an IP address. See page 6.
5. Set the password. See page 9.
6. Configure the wireless connection. See page 11.
(AXIS M1011-W/M1031-W only)

Package contents

Item
Network Camera
Indoor power adaptor
(country specific)
Camera stand
Flexible clamp
CD
Printed Materials
Installation Guide
Models/variants/notes
AXIS M1011
AXIS M1011-W
AXIS M1031-W
PS-H* or PS-V
Europe, UK, USA/Japan, Australia, Korea, Argentina, China
*power adaptor extension cable 1.8m (5.9ft), PS-H only
Including fitted extension section and 4 mounting screws/plugs
For shelf mounting
AXIS Network Video Product CD, including product documentation,
installation tools and other software
AXIS M1011/M1011-W/M1031-W Installation Guide (this document)
Axis Warranty Document
Important!
This product must be used in
compliance with local laws and
regulations.
Page 3