Sportplus Air Bike Pro Instructions D'utilisation page 33

Display functions:
SCAN •
•
TIME •
•
CALORIES •
•
ODOMETER •
(total distance) •
SPEED
•
•
DISTANCE •
(distance of the •
training unit)
Auto On/Off
• The computer activates automatically when you begin exercising.
• After 4 minutes, the computer automatically switches to standby mode when no
signal is received.
Important notes:
• If the computer display shows nothing or only some indicators, replace the
batteries.
• The computer is powered by 2 AAA batteries.
• All saved values are reset when you remove the batteries.
Press and hold the MODE button until SCAN appears in the
display.
Displays all functions and values in succession for approx.
6 seconds each.
Automatically measures the time as soon as training begins.
0:00 – 99:59 MIN
Shows the calories consumed during training. This is an
approximate value.
0.0 – 999.9 KCAL
Shows the total distance covered.
0 – 9999 KM
Shows the current training speed.
0.0 – 999.9 KM/H
Shows the distance covered during training.
0.0 – 999.9 KM
33