Attaching The Toys - Evenflo Baby Active ExerSaucer Jungle Quest Mode D'emploi

Assembling the ExerSaucer
M
K
Triangles
G
L
M
N
O
J
8. Turn seat ring G right side up.
Align the two triangles on the back
of the seat ring with the two
K
triangles on the label on the seat
pad J.
Snap the plastic tabs K on the pad
over the pegs L on the seat ring.
Continue this process until all tabs
are attached to all pegs.
L
9. Press assembled seat M down firmly onto the top of the tray
N until it snaps into place and spins freely.
10. Lean the tray assembly O against one of the pylons,
as shown.
4
P
O
Q
11. Insert a strap P through a strap slot Q in the tray O. Pull the strap completely through the tray making sure the strap
anchor R lies flat against the bottom of the tray, as shown. Repeat for the other two straps.
To prevent injury, make sure all three strap anchors are completely
inserted and resting against the bottom of the tray.
3 "AAA" Batteries
Assembling the ExerSaucer
P
WARNING

Attaching the Toys

3 "AAA" Batteries
5
R