Flex CI 11 18.0 Notice D'instruction D'origine page 15

CI 11 18.0
■ Push the air chuck (12) down so that the
threaded section of the valve stem is inside
the air chuck
■ Lock the air chuck clamp(10)
■ See the instructions in the section of "Use
the Digital Pressure Gauge in the High-
Pressure Mode" in this manual for using
the dual function inflator to start inflation.
Inflating with the High-Pressure
Hose and Adapters (see figure F)
The high-pressure hose can be used with the
provided adapters to inflate a variety of items
Removing/installing adapters
■ Unlock the air chuck clamp (10)
■ Push the adapter into the air chuck (12)
until it stops
■ Lock the air chuck clamp (10)
■ To remove the adapter, unlock the air
chuck clamp (10) and remove the adapter
from the air chuck (12).
Adapter Functions
■ The tapered adapter (13) -- Smaller air
valves (such as floats and children's toys)
■ The sports needle (14) -- Sports balls or any
other item that requires a sports needle.
■ The Presta valve adapter (11) -- Presta
valve stems.
To use the presta valve adapter
(see figure G)
■ Loosen the Presta valve locking nut (24).
■ Thread the Presta valve adapter (11) onto
the Presta valve stem (25) of the tire.
■ Clamp the air chuck (12) onto the Presta
valve adapter.
■ See the instructions in the section of "Use
the Digital Pressure Gauge in the High
Pressure Mode" in this manual for using
the dual function inflator to start inflation.
■ After inflation, loosen and remove the
air chuck (12) and the Presta valve
adapter(11), then tighten the locking nut
(24) of the Presta valve stem(25).
Inflating and Deflating with the
High-Volume Hose (see figure H)
The high volume hose (16) is meant to be
used for objects that hold large amounts of
air, such as air mattresses, rafts and swimming
pool floats.
■ Connect the high-volume hose (16) to the
high volume air output (20). Align and
attach the slots in the hose to the pins (26),
then turn the hose counter clockwise until
it locks in place
■ Connect other end of the hose to the item
to be inflated. Connect the hose directly or
use the adapter attached to the hose.
■ See the instructions in the section of "Use
the Digital Pressure Gauge in the High
Volume Mode" in this manual for using
the dual function inflator to start inflation.
■ After inflation, loosen and remove the high
volume hose (16).
Deflating with the High-Volume
Hose (see figure I)
■ Insert the high-volume hose (16) fully into
the air intake (17).
■ Connect other end of the hose to the item
to be deflated. Connect the hose directly
or use the adapter attached to the hose.
■ See the instructions in the section of "Use
the Digital Pressure Gauge in the High-
Volume Mode" in this manual for using the
dual function inflator to start deflation.
■ After deflation, remove the high volume
hose (16) from the air intake (17).
Using the Dual Function Inflator
Use the Digital Pressure Gauge in
the High-Pressure Mode
(see figure J)
■ Press the power button (6) to turn the
digital pressure gauge on. The working
mode will default to the high-pressure
mode (27). The dual function inflator will
detect the current air pressure of the item
(30).
■ Use the - and buttons + to set the target
pressure (28).
NOTE
If the current pressure item to be inflated is
greater than the target pressure, the dual
function inflator will not begin inflation.
■ To select the desired unit of pressure, press
the - and+ buttons simultaneously to scroll
through the units (29) of BAR, KPA and PSI.
■ To start or pause the inflation, press the
start/pause button (4).
■ The dual function inflator will shut off
automatically when the target pressure (28)
has been reached.
15