8
SPECIFICATIONS
MIXER SECTION
Input referred noise
Max balanced input gain
Balanced input impedance
Max balanced input gain 1/4" jacks
Balanced input impedance at 1/4" jacks
Unbalanced input impedance at RCA
Balanced CMRR
Frequency response at 36 dB gain
Signal path distortion
Typical signal level at patch bay
Channel Clip LED threshold
Channel EQ adjustment range
Graphic EQ adjustment range
Phantom Voltage
Frequency response
Input sensitivity
Total Harmonic Distortion
Max power into 8 Ohms <1% THD
Max power into 8 Ohms <1% THD
INPUT TO LINE OUT
-122 dB
+56 dB
1200 Ohms
+40 dB
10k Ohms
5k Ohms
min. 35dB, typical -50dB
+/-3 dB, 20 Hz to 20 KHz
less than 0.1% 20Hz-20KHz
1 VRMS
3 dB before clipping
+/- 15 dB
+/- 12 dB
24 V
AMPLIFIER
+/-1 dB, 20 Hz to 20 KHz
Gain
28 dB
1.4 VRMS
0.05% at 1KHz
215 Watts (one channel driven)
170 Watts (both channels driven)
MICROMIX
MICROMIX