Sauder 423547 Mode D'emploi page 7

Step 4
1. On each pencil mark, drill a 3/16" or 6mm hole for the
å
DRYWALL ANCHOR (2) or 1/8" hole into a stud in the wall.
2. Gently tap a DRYWALL ANCHOR (2) into each hole
å
until it is fl ush with the wall.
NOTE: Stud attachment will not use a DRYWALL
å
ANCHOR.
Drill an 1/8" hole into a
stud in the wall.
423547
Wall
Stud
Drill an 3/16" or 6mm hole for
the DRYWALL ANCHOR.
www.sauder.com
1.
2.
2
Page 7