Table des Matières
Publicité
Step 1
Your Wall Desk is intended to be fastened to wall studs using the included hardware.
å
If you need to drywall hang this unit, purchase a drywall anchor which is rated to support a MINIMUM of
å
80 lbs. Follow the instructions provided with the anchoring hardware.
Determine the desired height of the Wall Desk on your wall and subtract 7". Mark this location on your wall.
å
This will be the bottom edge of the WALL SUPPORT (A).
Locate and mark the wall stud locations on your wall.
å
NOTE: BE SURE THE TWO MARKS ON THE STUDS ARE LEVEL BEFORE DRILLING.
å
Angled edge
Page 4
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
Wall
Stud
7"
www.sauder.com
Desired upper line of wall unit
Lower edge line of WALL SUPPORT
423547
Publicité
Table des Matières
