Charging The Phone - ZTE Blade V8 LITE Guide De Démarrage Rapide

Installing the nano-SIM Card(s)
and the microSDXC™ Card
Power off your phone before installing or
removing the nano-SIM card.
WARNING!
To avoid damage to the phone, do not use any
other kind of SIM cards, or any non-standard
nano-SIM card cut from a SIM card. You can
get a standard nano-SIM card from your service
provider.
Insert the tip of the tray eject tool into the hole on
the card tray
Install the nano-SIM cards
nano-SIM
card 2
nano-SIM
card 1
6
NOTE:
The two nano-SIM slots support 4G/3G/2G
networks. When one nano-SIM card is set to
connect with 4G/3G networks, the other installed
nano-SIM card can only connect with 3G/2G
networks.
Install the microSDXC™ Card

Charging the Phone

Your phone's battery should have enough power
for the phone to turn on, find a signal, and make
a few calls. You should fully charge the battery
as soon as possible.
WARNING!
Use only ZTE-approved chargers and cables.
The use of unapproved accessories could
damage your phone or cause the battery to
explode.
WARNING!
Do not remove the back cover. The battery
is not removable. Removal may cause fire or
explosion.
7