Camera Setting - AKASO Brave 4 Manuel De L'utilisateur

EN
19. Self-Timer: Off/On
Default setting is off.
A Self Timer gives a delay between pressing the shutter release and the shutter's firing.
It is most commonly used to let photographers to take a photo of themselves (often
with family).

CAMERA SETTING

1. Special Effects: Normal/Black and White/Negative/Retro/Red/Green/Blue
Default setting is Normal.
2. Power Frequency: Auto/50 Hz/60 Hz
Default setting is Auto.
3. Language: English/Français/Deutsch/Español/Italiano/日本語/한국어/简体中文
Default setting is English.
4. Date & Time: MM/DD/YY
The date and time are automatically updated when you connect your camera to the
AKASO GO App. However, you can manually change these settings, if needed.
Note: If the battery is removed from the camera for an extended period of time, the
date and time will be reset automatically.
5. Sounds:
Shutter: Off/On Beep: Off/On
Volume: 0/30/70/100 Boot: Off/On
Default setting is on.
You can turn on or off the shutter, boot, beep sounds.
Sets the volume of your Brave 4's alerts
6. Drive Mode: Off/On
Default setting is Off.
12