AKASO Brave 4 Manuel De L'utilisateur page 12

EN
When you change this setting, the display immediately shows you the effect on your
image. If you change modes, the camera returns to using the entire scene to determine
the correct level of exposure.
7. WDR: Off/On
Default setting is Off.
Wide Dynamic Range (WDR) retains a greater level of detail in the dark and bright
areas of an image. The result is a photo that is properly exposed for both of these
extremes. This setting is especially useful for scenes that are backlist or that have
large bright regions and a dark foreground. WDR is available in Video mode only.
8. Metering: Average/Center/Spot
Default setting is average.
Choose the way your camera measures the light of the scene.
9. Sharpness: High/Middle/Low
Default setting is High.
Sharpness controls the quality of details captured in your video footage or photos.
When you change this setting, the touch display immediately shows you the effect on
your image.
10. Video Quality: High/Middle/Low
Default setting is Middle.
11. ISO: Auto/100/200/400/800/1600/3200/6400
Default setting is Auto.
ISO determines the camera's sensitivity to light, and creates a trade-off between
brightness and resulting image noise. Image noise refers to the degree of graininess
in the image. In low light, higher ISO values result in brighter images, but with greater
image noise. Lower values result in lower image noise, but darker images. When you
change this setting, the display immediately shows you the effect on your image.
12. Date Stamp: Off/On
Default setting is On.
Turn on Date Stamp, this camera will add a date stamp to your videos and photos.
10