System Setting (In Power Off Mode); Setting Fm Frequency Range; Turn On/Off The Lw; Setting Mw (Am) Tuning Step - Tecsun PL-660 Manuel D'utilisation

SETTING FM FREQUENCY RANGE:

Press & hold the [FM SET] button until 88-108 MHz, 76-108 MHz or 87-108 MHz
appears in the display. Quickly keep on pressing the [FM SET] button to select
suitable frequency range for your local FM.

TURN ON/OFF THE LW:

Press & hold the [AM] button until "LW ON" or "LW OFF" appears in the display
to turn ON or OFF the LW respectively.

SETTING MW (AM) TUNING STEP:

Press & hold [9/10 kHz] button until "9 kHz" or "10 kHz" appears in the display to
select your desired AM tuning step.

TURN ON/OFF THE INTELLIGENT AUTO LIGHTING

Factory default of intelligent auto lighting function is ON, with which the backlight
would be on for 3 seconds when operating any keys or knobs.
To deactivate the Auto lighting function, press & hold the [LIGHT SET] button with
the "OFF" shows in the display; press & hold the [LIGHT SET] button again with
"ON" shows up to activate it.
Note: After shutting down the intelligent auto lighting function, the
[LIGHT/SNOOZE] key can still be operated to turn on/off the
backlight

TURN ON/OFF THE CHARGING FUNCTION

Using Regular Batteries for power supply:

In radio off mode, press & hold the [BATTERY] key with "CHA OFF" showing up
& "Ni-MH Battery" disappearing to activate the consumption display of regular
batteries and turn off the built-in charging system.

Using Rechargeable Batteries for power supply:

Turn off the radio, press & hold the [BATTERY] key with "CHA ON" and
"Ni-MH Battery" showing up to activate the consumption display of rechargeable
batteries and turn on the built-in charging function.

SYSTEM SETTING (In Power Off Mode)

www.tecsunradios.com.au
-- 25 --
.